Ethical conditions and basic points
The responsible author (liaison author) is responsible for collecting the article and sending it to the journal office, and all authors are aware of the final text of this article and are aware of submitting the article to this journal. The authors also submit an article to this journal stating that the article was not submitted in any other language or journal. Otherwise, it is obvious that according to the publishing law, the author or authors are banned from publishing articles in journals and magazines covered by the publisher forever and their article will be removed at the discretion of the editor. Please submit and submit the article. On the site, note that someone must be selected as the author in charge of the site who can respond to emails sent from the system and the publishing office. The order and number of authors can only be accepted through the letter of commitment form registered at the beginning of the article.
The original article must be accompanied by a letter signed by all the authors of the article and their satisfaction with the publication of the article and also the fact that the article was not sent to other journals at the same time. Sending this application means accepting all the rules of the publication and also delegating all the authors' rights to the publisher.
The principles of writing must be observed. For example, semicolons are attached to the word before them and separated from the word after them. Observe the distances.
The editorial board is free to reject or accept articles.
Principles of ethics have been observed in conducting research.
The original file and the authors' information file should not be deleted under any circumstances. All correction files must be uploaded in the highlighted file section.
You do not need to submit the tables and figures in the text separately, put them all in one file.
Please send the original article file without a name and upload the full profile of all authors in a separate file.
Submitted articles are initially reviewed by the editorial board (less than 10 days) and, if they meet the publication criteria in terms of content and structure, are sent for judging (3 initial referees within 1 month). The judges will be selected from among the most experienced experts in the relevant field. If the article is printable by the judges but needs to be corrected, the opinions of the judges will be returned to the author for correction (within 1 to 2 months) after receiving the comments of the article for the final judge selected (sent within 1 to 2 months). Announce your final (within 1 month). In case of final acceptance of the referee's opinion, the articles are prepared to be prepared in the editorial office and their opinions and corrections are presented to the responsible author after review by the editorial board.
Permission to use citationable articles.
If a writer notices a significant mistake or carelessness in his work, he is obliged to immediately inform the editor of the Journal of Water in Agriculture and to assist in the process of reviewing and correcting the article.
The author of the article in the journal Water in Agriculture has the right to copy, republish and use his article. The author is allowed to preserve and publish the contents of his article. The author is also required to abide by all the rules of the journal, including the rights of fellow authors, the order in which their names are published, the completion of the publication agreement form, and the commitment to the originality of the submitted article.
Submission of article without (commitment form) will not be considered (when uploading in additional / supplementary files)
Article preparation guide
The journal "Water Research in Agriculture" is a quarterly journal that contains major articles and reviews. The purpose of this publication is to increase awareness among researchers in the field of irrigation and soil and water sciences to provide knowledge and research, identify and introduce new insights and ideas, and initiatives and innovations in scientific research at the national and international levels and increase the relationship between Educational centers, institutions, scientific institutes and transfer and exchange of results and findings on the sustainable use and exploitation of water and soil resources in agriculture. Strict observance of the following guide in preparing the article is considered as one of the conditions for its placement in the judging process.
The types of articles accepted in this journal include the following:
Title page
(It is fixed in all kinds of articles and must be written in both Persian and English)
The title page contains the full title of the article, the short title of the article, the names of the authors, the scientific address of the authors and the full details of contacting the responsible author and declaring a conflict of interest. The position of the authors must be exactly included in both the authors 'profile file and the authors' profile page. (For example: academic position, department, faculty, university, city, country)

Article text page layout
In writing and page layout of the article, it is necessary to pay attention to the following general principles:
The article should be written in A4 size and single column by Microsoft Office software version 2007 and above.
B lotus article font and text size 12 size. Titles should be written from the Bold version of the same font and in the same size. Line spacing should be considered Single.
The ritual of writing Persian language should be observed and foreign words that have equivalent expressions in Persian should be avoided
Insert page numbers in the middle and bottom of the pages.
The number of tables, graphs and pictures should be commensurate with the size of the article. A maximum of 7 tables, photos and charts are acceptable.
Tables should be named in Iranian numbers, such as "Table 1-" "Figure 1-"
The contents of the tables and diagrams as well as the descriptions of the tables of diagrams and pictures must be in Persian.
Persian numbers should be written with decimals (/) and English numbers with dots (0).
Each of the pictures, tables and diagrams should be placed in its place and within the text of the article.
The descriptions of the charts and pictures should be written in full.
Each image must be submitted in JPEG or TIFF format with a resolution of at least 300 dpi for the publication.
Tables, charts and pictures should be numbered sequentially throughout the article.
Each table should have a title at the top of the table.
Each image and graph should have a title below it.
The copyright form of the article should be signed by all authors and registered in the article submission system. The responsibility for the authenticity of all authors' signatures lies with the author.
How to write an original research article
Unstructured abstract and keywords
Research article abstract contains a maximum of 300 words. Keywords 3-7 Keywords are recommended from the keywords of the main topics.
The abstract of the article should be submitted in both Persian and English languages ​​and the text of the English and Persian abstracts should match.
Introduction
In this section, the purpose of the article is stated and its importance and necessity are examined. Introduction includes 1. Background and explanation of the subject with reference to 2. the necessity of doing research. 3. The unanswered questions that this research answers and how this research can help resolve ambiguities. 4. Definition of specialized terms or scientific abbreviations. 5. The purpose of the research is clear.
analysis method
It should be written in such a way that any reader can repeat the experience of the author of the article. In this section, the studied samples and their demographic characteristics, how to select samples, how to collect information (eg questionnaire), laboratory methods and equipment used. (Including consumption method, manufacturer, etc.) as well as statistical study methods, entry and exit criteria, be fully described.
Briefly, the survey method includes: 1. Time and place of the research 2. Subjects and samples to be tested and selection criteria, sampling method and logic of sample number (this part is very important and will be examined at the beginning) 3. How Data collection. 4. Observance of ethics standards in research. 5. Measuring tools. 6. Statistical tests.
The name of the country and the manufacturer of materials and devices should be written in English between the parts of the article.
findings
The text of this section should be concise and clear. Examine all variables and summarize tables and graphs. If the data of a table is completely expressed in the text of the article, the table should not be included. Due to the limited pages of the magazine, it is obvious that the presentation of the contents of the text in the tables and vice versa should be avoided, the tables and charts should be Persian. Photos, diagrams and tables related to the article along with their descriptions should be specified in the text of the article and with Persian numbering.
Discuss
First, the result of the study is briefly stated. Of course, the items presented in the introduction and findings should not be repeated in detail in this section. In this section, important aspects of the study are emphasized and while reviewing other articles in this field, this study is compared with other studies, the results will be compared with the initial objectives of the study and will be interpreted. Provide the necessary suggestions and express the strengths and weaknesses of the study.
Conclusion
At the end, in a paragraph, the final conclusion and what is added to science from this research is presented.
Acknowledgments
Authors should point out and appreciate the centers or individuals who have been influential in shaping the research. Also, if needed, the research sponsor will be mentioned and appreciated in this section.
measurements
When referring to numbers and values ​​in the text, consider the following:
- SI units should be used in writing the article.
An empty space must be inserted between the quantity and the unit value. Example:, 50 kN not 50kN
Length: meters (m), mm (mm), micrometers (µm), nanometers (nm)
Area: hectares (ha), square meters (m2)
Volume: cubic meters (m3), liters (L)
Mass: kg (kg), g (g), mg (mg), micrograms (µg), ng (ng)
Yield: kg per hectare (kg ha-1), liters per hectare (L ha-1)
Energy: joules (J), joules per square meter (J / m2), watts per square meter (W / m2)
Pressure: MPa (MPa)
Temperature: degrees Celsius ْ
Transpiration: mmol (water) per square meter per second (mmol m-2 s-1)
Photosynthesis: micromoles (CO2) per square meter per second (olmol m-2 s-1)
Concentrations: grams per liter (g / L), mol per liter (mol / L), millimoles per liter (mmol / L), micromoles per liter (olmol / L), nanomoles per liter (nmol / L)